BMW 2005 645Ci Convertible Manual Do Proprietário
Adju
stmen
ts
46
Seat, mirror and steering
wheel memory
You can store and select three different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Turn ignition key to position 1 or 2, refer to
page
page
2.
Adjust the desired seat, exterior mirror and
steering-wheel positions.
steering-wheel positions.
3.
Press the
button:
The indicator lamp in the button lights up.
4.
Press the desired memory button
1, 2 or 3:
The indicator lamp goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.
the seat or steering wheel.
<
Convenience mode
1.
Open the driver's door after unlocking or
turn the ignition key to position 1, refer to
page
turn the ignition key to position 1, refer to
page
2.
Briefly press the desired memory button
1,
2 or 3.
The system immediately cancels the adjust-
ment procedure when you briefly press one of
the seat adjustment switches or one of the
memory buttons.
ment procedure when you briefly press one of
the seat adjustment switches or one of the
memory buttons.
The adjusting procedure for the steering wheel
is immediately interrupted if you operate the
switch for the steering wheel adjustment in any
direction, refer to page
is immediately interrupted if you operate the
switch for the steering wheel adjustment in any
direction, refer to page
Safety feature
1.
Close the driver's door and turn the ignition
key to position 0 or 2, refer to page
key to position 0 or 2, refer to page
.
2.
Press the desired memory button
1, 2 or 3
and maintain pressure until the adjustment
process has been completed.
process has been completed.
If the
button was pressed inadvertently:
Press the button again; the indicator lamp goes
out.
out.
Position stored in key
The positions of the driver's seat, the external
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
You can choose when the position is requested:
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
You can choose when the position is requested:
>
Request when unlocking vehicle
>
Request when opening driver's door
Control Center, for principle details, refer to
page
page
.
1.
Open the menu.
2.
Select "Vehicle settings" and press the
controller.
controller.
3.
Select "Door locks" and press the control-
ler.
ler.
4.
Select "Central locking" and press the con-
troller.
troller.
5.
Select "Last seat pos." and press the con-
troller.
troller.
6.
Select "After unlocking" or "After opening
door" and press the controller.
door" and press the controller.
Online Edition for Part-No. 01 41 0 158 445 - © 09/04 BMW AG