BMW 2005 645Ci Convertible Manual Do Proprietário
55
SMG Sequential manual transmission*
and automatic transmission*
and automatic transmission*
Your BMW is equipped with the convenience
starting feature. It is sufficient to turn the igni-
tion key only briefly to position 3 and then
release it right away. The system responds by
automatically engaging the starter for a certain
period and allowing it to run until the engine
starts, after which it then disengages automati-
cally.
starting feature. It is sufficient to turn the igni-
tion key only briefly to position 3 and then
release it right away. The system responds by
automatically engaging the starter for a certain
period and allowing it to run until the engine
starts, after which it then disengages automati-
cally.
SMG Sequential manual transmission*
1.
Press the brake pedal.
2.
Engage selector-lever position N.
3.
Start the engine.
If the engine does not start, engage the
last gear selected again, refer to instru-
last gear selected again, refer to instru-
ment cluster display, and then shift into posi-
tion N.
tion N.
<
Automatic transmission with
Steptronic*
Steptronic*
1.
Press the brake pedal.
2.
Engage selector-lever position P or N.
3.
Start the engine.
Switching off engine
Do not remove the ignition key while the
vehicle is rolling, as otherwise the steer-
vehicle is rolling, as otherwise the steer-
ing wheel lock will immobilize the steering.
When leaving the vehicle, remove the ignition
key and lock the steering.
When parking on a downhill incline, apply the
handbrake, as otherwise the vehicle could roll
away.
When leaving the vehicle, remove the ignition
key and lock the steering.
When parking on a downhill incline, apply the
handbrake, as otherwise the vehicle could roll
away.
<
Manual transmission
1.
Turn the ignition key to position 1 or 0.
2.
Shift into first gear or reverse.
SMG Sequential manual transmission*
1.
Engage a drive position.
2.
Turn the ignition key to position 1 or 0.
A signal sounds on stopping the engine.
A signal sounds on stopping the engine.
Automatic transmission with
Steptronic*
Steptronic*
1.
Engage selector-lever position P.
2.
Turn the ignition key to position 1 or 0.
Handbrake
The handbrake is primarily intended to prevent
the vehicle from rolling while parked; it brakes
the rear wheels.
the vehicle from rolling while parked; it brakes
the rear wheels.
Indicator lamp
The indicator lamp lights up, and an
acoustic signal also sounds when start-
ing off. The handbrake is engaged.
Indicator lamp for Canadian models.
acoustic signal also sounds when start-
ing off. The handbrake is engaged.
Indicator lamp for Canadian models.
Engaging
The lever engages automatically.
Releasing
Pull slightly upward, press the button and lower
the lever.
the lever.
If exceptional circumstances should
make it necessary to engage the hand-
make it necessary to engage the hand-
brake while the vehicle is in motion, do not pull it
too strongly. In doing so, continuously press the
button of the handbrake lever.
Strong application of the handbrake can lead to
overbraking of the rear axle and associated
'fishtailing' of the vehicle rear end.
The brake lamps do not light up when the hand-
brake is engaged.
too strongly. In doing so, continuously press the
button of the handbrake lever.
Strong application of the handbrake can lead to
overbraking of the rear axle and associated
'fishtailing' of the vehicle rear end.
The brake lamps do not light up when the hand-
brake is engaged.
Online Edition for Part-No. 01 41 0 158 445 - © 09/04 BMW AG