BMW 2005 645Ci Convertible Manual Do Proprietário
E
ve
ryth
ing un
de
r co
nt
rol
70
Engine oil thermometer
The engine oil temperature is between approx.
160
160
7/706 and approx. 3407/1706 during
normal operation.
If the engine oil temperature is too high, a mes-
sage appears on the Control Display.
If the engine oil temperature is too high, a mes-
sage appears on the Control Display.
Fuel gage
Fuel tank capacity: approx. 18.5 US gallons/
70 liters, including the reserve capacity of
approx. 2.1 gallons/8 liters. You can find infor-
mation on refueling on page
70 liters, including the reserve capacity of
approx. 2.1 gallons/8 liters. You can find infor-
mation on refueling on page
If the tilt of the vehicle varies for a longer period,
when you are driving in mountainous areas, for
example, the indicator may fluctuate slightly.
After the reserve quantity has been reached, a
message appears for a short time on the Con-
trol Display; the remaining range is shown in the
computer. Below a range of approx. 30 miles/
50 km, the message remains on the Control
Display.
when you are driving in mountainous areas, for
example, the indicator may fluctuate slightly.
After the reserve quantity has been reached, a
message appears for a short time on the Con-
trol Display; the remaining range is shown in the
computer. Below a range of approx. 30 miles/
50 km, the message remains on the Control
Display.
Refuel as soon as possible once your
cruising range falls below 30 miles/
cruising range falls below 30 miles/
50 km, as otherwise engine functions are not
ensured and damage can occur.
ensured and damage can occur.
<
Service requirements
The remaining distance to be driven and the
date for the next maintenance are briefly indi-
cated with the ignition key in position 2.
date for the next maintenance are briefly indi-
cated with the ignition key in position 2.
Your BMW Service Advisor will determine
your vehicle's current service require-
your vehicle's current service require-
ments by reading out the data stored in the
master key.
master key.
<
Additional information
You can view additional information on service
and maintenance procedures on the Control
Display.
Control Center, for principle details, refer to
page
and maintenance procedures on the Control
Display.
Control Center, for principle details, refer to
page
.
1.
Open the menu.
2.
Select "Service" and press the controller.
3.
Select "Service requirements" and press
the controller.
the controller.
4.
Select "Status" and press the controller.
The display shows a list of selected service and
maintenance procedures, as well as legally
mandated official inspections.
maintenance procedures, as well as legally
mandated official inspections.
Online Edition for Part-No. 01 41 0 158 445 - © 09/04 BMW AG