BMW 2005 X5 4.8is SAV Manual Do Proprietário
82
n
Check Control
Computer
> TRANS. FAILSAFE PROG
*
> CHECK BRAKE LININGS
> CHECK COOLANT LEVEL
Coolant too low, top off at the next
opportunity, refer to page
opportunity, refer to page
> ENGINE FAILSAFE PROG
Fault in the engine electronics.
You can continue to drive with
reduced engine output or engine
speed.
Please have the system inspected by
your BMW Sports Activity Vehicle
center.
You can continue to drive with
reduced engine output or engine
speed.
Please have the system inspected by
your BMW Sports Activity Vehicle
center.
Displays after completion of trip
All of the malfunctions registered during
the trip appear consecutively when the
ignition key is turned to position 0.
the trip appear consecutively when the
ignition key is turned to position 0.
The following displays will appear when
appropriate:
> LIGHTS ON
appropriate:
> LIGHTS ON
> KEY IN IGNITION LOCK
> CHECK ENGINE OIL LEV
This display appears when you open
the driver's door after parking the vehi-
cle. A supplementary acoustic signal is
also heard.
the driver's door after parking the vehi-
cle. A supplementary acoustic signal is
also heard.
Status messages remain available with
the CHECK button 3 for a period of
approx. three minutes after the display
goes out and the key is removed from
the ignition lock. If there were multiple
messages, press the CHECK button
repeatedly to view them all in
sequence.
the CHECK button 3 for a period of
approx. three minutes after the display
goes out and the key is removed from
the ignition lock. If there were multiple
messages, press the CHECK button
repeatedly to view them all in
sequence.
Checking Check Control
Press the CHECK button 3 with the
ignition key in position 2:
CHECK CONTROL OK appears in the
display.
ignition key in position 2:
CHECK CONTROL OK appears in the
display.
No malfunctions are present in the
monitored systems.
monitored systems.
Computer
You can find a description of the com-
puter on pages
puter on pages
as well as in
the Owner's Manual for Onboard Com-
puter.
puter.
You can have the Check Control
and computer messages dis-
and computer messages dis-
played in a different language.
<
Mode selection
As of ignition key position 1, you can
call up information from the computer
using the computer button in the turn
signal lever.
call up information from the computer
using the computer button in the turn
signal lever.
A new function appears each time you
briefly press the computer button.
briefly press the computer button.
The display sequence:
> Outside temperature
> Outside temperature
> Average fuel consumption
> Cruising range
> Average speed.
As of ignition key position 1, the last
active setting is displayed.
As of ignition key position 1, the last
active setting is displayed.
The range of available displays varies
according to your individual vehicle's
equipment.
according to your individual vehicle's
equipment.
53
0d
e
2
28
Online Edition for Part No. 01 41 0 158 701 - © 10/04 BMW AG