BMW 2005 330i Sedan Manual Do Proprietário

Página de 223
 183
>
"Please observe recalculated service inter-
val for engine oil"
Do not add engine oil. You can continue 
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer 
to page
. Have the system checked as 
soon as possible.
Adding engine oil
Do not add the maximum amount of 
1.1 US quarts/1 liter of engine oil until a corre-
sponding message is shown on the Control Dis-
play.
Add oil within the next 125 miles/200 km, 
otherwise the engine could be dam-
aged.
<
Keep oils, greases, etc. out of the reach of 
children and comply with the warnings on 
the containers. Otherwise, health hazards may 
result.
<
Oil change
Have oil changed only at your BMW center or at 
a workshop that works according to BMW 
repair procedures with correspondingly trained 
personnel.
Specified engine oils
The quality of the engine oil selected has critical 
significance for the operation and service life of 
an engine. BMW continuously approves spe-
cific oils after confirming their suitability for use 
in its vehicles with extensive testing.
Use only approved BMW High Performance 
Synthetic Oil.
If you are unable to obtain BMW High Perfor-
mance Synthetic Oil, you can add small 
amounts of another synthetic oil between oil 
changes. Use only oils with the API SH specifi-
cation or higher.
Ask your BMW center for details concern-
ing the specific BMW High Performance 
Synthetic Oil or synthetic oils which have been 
approved.
<
You can also call BMW of North America
at 1-800-831-1117 or visit this website: 
www.bmwusa.com to obtain this information.
Viscosity ratings
Viscosity is the oil flow rating as defined in SAE 
classes.
The selection of the correct SAE class depends 
on the climatic conditions in the area where you 
typically drive your BMW.
Approved oils are in SAE classes 5W-40 
and 5W-30.
<
These oils may be used for driving in all ambient 
temperatures.
Coolant
Do not add coolant to the cooling system 
when the engine is hot. Escaping coolant 
can cause burns.
<
Coolant is a mixture of water and an additive. 
Not all commercially available additives are suit-
able for your BMW. Ask your BMW center for 
suitable additives.
Only use suitable additives, as otherwise 
engine damage may result. The additives 
are hazardous to your health.
<
Comply with the appropriate environ-
mental protection regulations when dis-
posing of coolant additives.
<
Checking coolant level
1.
The engine must be at ambient tempera-
ture.
2.
Turn the cap of the expansion tank counter-
clockwise to allow any accumulated pres-
sure to escape, then continue turning to 
open.
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG