BMW 2005 645Ci Coupe Manual Do Proprietário

Página de 217
Te
ch
nolo
gy 
fo
r co
mfort
, c
o
nve
n
ie
nc
e an
sa
fe
ty
82
Do not reduce the pressure on the brake pedal 
for the duration of the brake application. When 
the brake pedal is released, DBC is deactivated.
DSC Dynamic Stability Control
The system prevents slip at the drive wheels 
when driving off and accelerating. DSC also 
detects unstable driving conditions such as 
fishtailing or sliding of the front wheels. In these 
cases DSC helps the vehicle safely stay on 
course within the physical limits by reducing the 
engine output and through braking actions in 
the individual wheels.
The DSC is operational every time you start the 
engine.
The laws of physics cannot be repealed, 
even with DSC. An appropriate driving 
style always remains the responsibility of the 
driver. Therefore, do not reduce the additional 
safety margin again by taking risks.
<
DTC Dynamic Traction Control
DTC is a variant of DSC for special road condi-
tions, e.g. uncleared snow-covered roads, that 
is optimized for forward momentum. The sys-
tem ensures maximum forward momentum, but 
with limited driving stability. Therefore, drive 
with the corresponding caution.
You may find it useful to briefly activate DTC 
under the following special circumstances:
>
When driving on snow-covered uphill 
grades, in slushy snow or on uncleared, 
snow-covered roads
>
When rocking a stuck vehicle free or when 
starting off in deep snow or on loose ground
>
When driving with snow chains
*
Activating DTC
Press the button; the DTC indicator lamp in the 
instrument cluster lights up.
Deactivating DTC again
Press the button again; the DTC indicator lamp 
in the instrument cluster goes out.
Deactivating DTC and DSC together
Press the button until the DSC indicator lamp in 
the instrument cluster lights up, however not 
longer than approx. 10 seconds. Interventions 
promoting stability and forward momentum will 
no longer be carried out. In addition, the stability 
promoting intervention of the active steering
*
 
is deactivated, refer to page
.
A message appears on the Control Display. 
Please note any supplementary information 
that appears there.
To support enhanced operating stability, reacti-
vate DSC again as soon as possible.
Reactivating DSC
Press the button; the indicator lamp in the 
instrument cluster goes out.
Online Edition for Part-No. 01 41 0 158 445 - © 09/04 BMW AG