BMW 2005 325i Sports Wagon Manual Do Proprietário

Página de 178
112
To remove cargo cover and 
partition net
1. Press the buttons on the sides – see 
arrow 1
2. Extract the case by pulling to the rear 
– see arrow 2.
Installation
Simply slide the case forward in the two 
side holders until it engages.
Storing with backrests folded 
forward
Supports for the case are provided on 
the rear sides of the backrests – see 
arrow 1.
Insert the case from the right as shown 
in the illustration, continuing until the 
detent engages – see arrow 2. Ensure 
that the cargo cover points toward the 
front of the vehicle, with the partition 
net's loop on the top.
You can pull the partition net out and 
insert it into the holders above it in the 
upper roof area.
To ensure that the case is properly 
positioned, remember to insert it 
on both guides from the right side, 
always continuing until the detents 
snap into place. Failure to observe the 
prescribed insertion procedure could 
also result in damage to the door's 
upholstery.
<
Cargo area
Online Edition for Part-No. 01 41 0 157 605 - © 09/03 BMW AG