BMW 2004 Z4 Roadster 3.0i Manual Do Proprietário

Página de 120
Opening and closing
26
Arming and disarming the alarm 
system
When the vehicle is locked or unlocked 
either via the driver's door lock or with the 
remote control, the alarm system is simul-
taneously armed or disarmed.
The hazard warning flashers blink once 
when the alarm system has been properly 
armed.
You can have different acknowledg-
ment signals set to confirm arming 
and disarming.
<
You can still open the luggage compart-
ment lid when the system is armed by 
pressing the remote control button, refer to 
page 
again secured.
Manual operation of the luggage 
compartment lid triggers the alarm. 
Refer to page 
<
To cancel an alarm: 
Press the button on the remote control, 
refer to page 
, or turn the ignition key to 
position 1. Refer to page 
Indicator lamp displays
>
The indicator lamp beneath the interior 
mirror flashes continuously:
The system is armed
>
The indicator lamp flashes when it is 
being armed: 
A door, the hood or luggage compart-
ment lid is not completely closed. Even 
if you do not close the area causing the 
alert, the remaining areas are secured 
and the indicator lamp flashes continu-
ously after 10 seconds. 
However, the interior motion sensor is 
not activated
>
If the indicator lamp goes out as soon 
as the system is disarmed: 
No manipulation or attempted intru-
sions have been detected in the period 
since the system was armed
>
If the indicator lamp flashes for 
10 seconds when the system is being 
disarmed: 
An attempted entry has been detected 
in the period since the system was 
armed.
After an alarm has been triggered, the indi-
cator lamp will flash continuously.
Interior motion sensor* 
The system monitors the footwells and the 
seating areas of the driver and passenger.
Deactivate the interior motion sensor, 
refer to Avoiding unintentional alarms, 
if children or animals are to remain in the 
vehicle.
<
Avoiding unintentional alarms 
The tilt alarm sensor and interior motion 
sensor can be deactivated at the same 
time. You can do this to prevent a false 
alarm from being triggered, for instance in 
garages with elevator ramps or when the 
vehicle is transported by train.
Lock the vehicle twice = arm the system:
Press the button on the remote control 
twice in succession,
or
lock the vehicle twice with the key. Refer to 
page 
The indicator lamp lights up briefly and 
then flashes continuously. The tilt alarm 
sensor and the interior motion sensor are 
deactivated as long as the system is 
armed.
Online Version for Part No. 01 41 0 157 498 - © 10/03 BMW AG