BMW 2004 Z4 Roadster 3.0i Manual Do Proprietário
Lamps
46
Lamps
Parking lamps/Low beams
Parking lamps
The front, rear and side vehicle
lighting is switched on. You can use
the parking lamps to signal the
lighting is switched on. You can use
the parking lamps to signal the
position of the vehicle when it is parked.
For information on lighting on one side of
the vehicle for parking, which is available
as an additional feature, refer to page
For information on lighting on one side of
the vehicle for parking, which is available
as an additional feature, refer to page
.
Low beams
When you switch off the ignition
with the low beam headlamps on,
only the parking lamps will remain
with the low beam headlamps on,
only the parking lamps will remain
on.
Defective bulbs
The indicator lamp lights up:
At least one bulb of the vehicle's
exterior lighting has failed.
At least one bulb of the vehicle's
exterior lighting has failed.
.
Follow me home lamps
When you activate the headlamp flasher
after parking the vehicle and switching off
the lights, the low beams will come on for a
brief period.
after parking the vehicle and switching off
the lights, the low beams will come on for a
brief period.
You can also have this function acti-
vated/deactivated if you wish.
vated/deactivated if you wish.
<
LIGHTS ON warning
Whenever you open the driver's door after
having turned the ignition key to position 0,
you will hear an acoustic signal for a few
having turned the ignition key to position 0,
you will hear an acoustic signal for a few
seconds to remind you that the lamps have
not been switched off
not been switched off
.
Daytime driving lamps*
If you desire, the light switch can be left in
the second position:
When the ignition is switched off, the exter-
nal lighting is also switched off.
the second position:
When the ignition is switched off, the exter-
nal lighting is also switched off.
You can have the activation settings
for the daytime driving lamps pro-
for the daytime driving lamps pro-
grammed on your vehicle.
<
Automatic headlamp control*
When the switch is set to this posi-
tion, the system automatically acti-
vates and cancels the low beams in
tion, the system automatically acti-
vates and cancels the low beams in
response to changes in ambient light, for
example in tunnels, at dusk, and when it is
raining or snowing.
example in tunnels, at dusk, and when it is
raining or snowing.
The vehicle's external lights remain
on constantly when you switch on the
on constantly when you switch on the
front fog lamps after the headlamps have
come on automatically.
come on automatically.
<
Automatic headlamp control cannot
serve as a substitute for the driver's
serve as a substitute for the driver's
judgement in determining when the vehicle
lights should be switched on. For example,
the sensors are not able to detect fog. To
avoid safety risks, you should respond to
these kinds of low-visibility situations by
switching the headlamps on manually.
lights should be switched on. For example,
the sensors are not able to detect fog. To
avoid safety risks, you should respond to
these kinds of low-visibility situations by
switching the headlamps on manually.
<
You can have the sensitivity of your
vehicle's automatic headlamp control
vehicle's automatic headlamp control
adjusted.
<
Online Version for Part No. 01 41 0 157 498 - © 10/03 BMW AG