BMW 2004 Z4 Roadster 3.0i Manual Do Proprietário

 89

1.

Open the caps with a suitable object, 
e.g. a coin or screwdriver

2.

Fold up the protective cover in the 
wheel well.

1.

Pull the wire clamp out straight

2.

Pull the wire clamp past the catches, 
see arrows, and fold it down

3.

Flip the headlamp cover open and 
remove.

Reinstall the headlamp cover care-
fully. If it is not on tight, the headlamp 

installation could be damaged.

<

Reinstall the headlamp cover in reverse 
order.

Left side of engine compartment:

Low beams

High beams

H7 bulb, 55 watts

The H7 bulb is pressurized. There-
fore, wear safety glasses and protec-

tive gloves. Failure to comply with these 
precautions could result in physical injury if 
the bulb is damaged.

<

1.

Turn the bulb holder to the left and pull 
out

2.

Remove and replace the bulb

3.

Install in the reverse order.

When cleaning the headlamps, 
please observe the instructions in the 

Caring for your vehicle brochure.

<

The service life of these bulbs is very long 
and the probability of a failure is very low, 
provided that they are not switched on and 
off an unusual number of times. If one of 
these bulbs should nevertheless fail, it is 
possible to continue driving with great cau-
tion using the fog lamps, provided traffic 
laws in your area do not prohibit this.

Because of the extremely high volt-
ages involved, any work on the xenon 

lighting system, including bulb-changing, 
should be carried out by technically quali-
fied personnel only. Otherwise, there is a 
risk of fatal injury.

<

Online Version for Part No. 01 41 0 157 498 - © 10/03 BMW AG