BMW 2004 Mini Convertible Cooper Manual Do Utilizador

Página de 165
52
STARTING THE ENGINE
SWITCHING OFF THE ENGINE 
Starting
When starting the engine, do not press the 
accelerator pedal.
Do not stop the starting procedure 
too early, and do not continue it for 
more than approx. 20 seconds. Release the 
ignition key immediately when the engine 
starts. 
Extended starting attempts, characterized 
by excessively frequent or long periods 
with the starter engaged, can lead to dam-
age in the catalytic converter.
<
If the engine does not start on the first 
attempt, for instance if the engine is very 
hot or cold:
When starting the engine, press the gas 
pedal down halfway.
Cold start at very low temperatures, above 
approx. +5 
7 / –15 6, at high altitudes 
above 3,300 ft / 1,000 m:
>For the initial start attempt, allow the 
starter to remain engaged somewhat 
longer, approx. 10 seconds.
>When starting the engine, press the gas 
pedal down halfway. 
Manual transmission
1. Engage the parking brake
2. Put the manual gearshift lever in neutral
3. Depress the clutch pedal, especially at 
low temperatures
4. Start the engine.
Move the gearshift lever to neutral 
position and engage the parking 
brake before leaving your vehicle with the 
engine running. 
Do not leave the vehicle unattended with 
the engine running. This is a safety haz-
ard.
<
Continuously Variable automatic 
Transmission (CVT)
1. Press the footbrake
2. Put the selector lever in position P or N
3. Start the engine.
Move the selector lever to position P 
and engage the parking brake before 
leaving your vehicle with the engine run-
ning. 
Do not leave the vehicle unattended with 
the engine running. This is a safety haz-
ard.
<
You should never remove the ignition 
key when the vehicle is in motion, as 
the steering lock could engage. 
When you leave the vehicle, always remove 
the ignition key and engage the steering 
lock. 
When parking on inclines, engage the park-
ing brake, or the vehicle could roll.
<
Manual transmission
Turn the ignition key to position 1 or 0.
Continuously Variable automatic 
Transmission (CVT)
Engage selector lever position P, turn the 
ignition key to position 1 or 0.
Online Edition for Part-No. 01 41 0 158 427 - © 07/04 BMW AG