BMW 2004 Mini Convertible Cooper Manual Do Utilizador

PARKING LAMPS/LOW BEAMS 

Turn to the first position.  
The front, rear and side vehicle lighting is 
switched on.  
Standing lamps on one side, refer to next 
column.

Turn to the second position.  
With the low beams on and with the igni-
tion switched off, only the parking lamps 
will remain on.

If you activate the headlamp flasher after 
having switched off the engine and the 
lights, the low beams will stay lit for a pre-
set period of time. 

You can have this function pro-
grammed.

<

For parking, you can activate lights on one 
side of the vehicle. Observe local laws.

In ignition key position 0:

Move the lever to the adequate turn signal 
indicator position.

The standing lamps discharge the 
battery. Avoid using them for longer 

periods of time; otherwise, you may not be 
able to start the engine.

<

If the lights have not been switched off and 
the ignition key is in position 0, an acoustic 
signal sounds for a few seconds when you 
open the driver's door to remind you that 
the lights have not been switched off.

If convenient, the light switch can be left in 
position 0 or 1. 
The low beams switch on automatically in 
ignition key position 2 or higher. 
The exterior lamps go out when the igni-
tion is switched off and the light switch is 
set to position 0. In position 1, the parking 
lamps are automatically switched on.

The dynamic headlamp range con-
trol for xenon lamps only operates 

with the light switch in position 1 or 2.

<

You can have the daytime driving 
lamp function activated/deacti-

vated.

<

Online Edition for Part-No. 01 41 0 158 427 - © 07/04 BMW AG