BMW 2005 325xi Sports Wagon Manual Do Proprietário

Dynamic Stability Control (DSC) – 325xi

The concept

DSC maintains vehicle stability, even in
critical driving situations.

DSC is operational every time you start
the engine.

DSC incorporates the Automatic Differ-
ential Brake (ADB-X) and Cornering
Brake Control (CBC) functions.

Indicator lamps

The indicator lamp in the instru-
ment cluster goes out shortly
after you switch on the ignition,

refer to page

> The indicator lamp flashes: DSC con-

trols the drive and braking forces

> The indicator lamp stays lit: DSC has

been switched off with the button;
ADB-X is operational. ADB-X control
intervention is not indicated.

If the indicator lamp fails to go out
when you press the DSC button

again, this indicates a malfunction in
the DSC and ADB-X systems; the sta-
bility enhancement functions are no
longer available.

The vehicle will remain completely
operational, however, without DSC. In
the event of a fault, please consult your
BMW center.

To deactivate DSC

Press the DSC button; the indicator
lamp comes on and remains lit.

DSC is switched off, and ADB-X reverts
to its maximum torque-transfer mode.

In the following rare situations, it may
be effective to deactivate the DSC for a
brief period:
> When rocking the vehicle or starting

off in deep snow or on loose surfaces

> When driving with snow chains.

To maintain vehicle stability,
always drive with the DSC acti-

vated whenever possible.