BMW 2004 Z4 Roadster 2.5i Manual Do Proprietário

30

1.

Close the driver's door and turn the 
ignition key to position 0 or 2

2.

Press and hold the desired memory 
button 1, 2 or 3 until the adjustment 
process is completed.

If you press the 

M

EMORY button acciden-

tally: 
Press the button again; the indicator lamp 
goes out.

The seat cushion and backrest can be 
heated with the ignition key in position 2.

You can call up different heating modes by 
repeatedly pressing the buttons.

The seat heating can also be switched off 
from the higher heating modes:
Press the button and hold it slightly longer.

Make sure you hear the lock engage in the 
belt buckle.

The warning lamp in the instrument 
cluster lights up for a few seconds 
or until the safety belts have been 

fastened. Depending on the vehicle ver-
sion, an acoustic signal

 sounds at the 

same time.

1.

Press the red button in the belt buckle

2.

Hold the belt

3.

Guide the belt back into its reel.

The upper belt attachment point is suitable 
for all body sizes provided that the person 
is sitting correctly, refer to page 

.

If the safety belts are damaged or 
stretched in an accident: have the 

entire belt system, including the tensioning 
mechanisms, replaced at your BMW cen-
ter. Have the belt anchorage points 
inspected for damage at the same time. 
Failure to observe this precaution may pre-
vent the safety belts from effectively pro-
viding optimal protection when needed.

<

Never attempt to adjust the steering 
wheel while driving the vehicle. It 

could respond with unexpected move-
ment, posing a potential accident hazard.

<

1.

Push the locking lever downward

2.

Adjust the steering column's reach and 
height to suit your seat position

3.

Pull the lever back in.

Online Version for Part No. 01 41 0 157 498 - © 10/03 BMW AG