BMW 2004 645Ci Convertible Manual Do Proprietário

Página de 216
 155
TeleService , BMW Assist  
TeleService 
TeleService supports you in communicat-
ing with your BMW center. The installed car 
phone can be used to transmit data on the 
service status of your vehicle or on legally 
mandated inspections directly to your 
BMW center. This is the same data that is 
also stored for CBS Condition Based Ser-
vice in the ignition key. Your BMW center 
can then contact you, and you can make an 
appointment that suits you while you are 
still on the road. Your advantage is that 
your BMW center can prepare in advance 
for the required maintenance work. The 
functions of TeleService are country-spe-
cific: the data on the service status of your 
vehicle or on legally mandated inspections 
is transmitted on a country-specific basis 
either automatically before they fall due or 
simultaneously when you call your BMW 
center. Your BMW center will be glad to 
provide more detailed information.
BMW Assist 
BMW Assist provides you – in addition to 
TeleService – with other services, e.g. the 
position data of your vehicle can be trans-
ferred to the BMW Assist emergency call 
center if an emergency call is started.
Many functions of BMW Assist depend on 
the individually agreed contract. The data 
transmission, e.g. of CBS Condition Based 
Service, is different in individual countries.
The subscriber agreement must be com-
pleted successfully before using the BMW 
Assist services.
Requirements
The installed car phone is logged on to a 
portable telephone network. This network 
must be able to transmit the services.
To transmit position data, the vehicle must 
be able to determine the current position. 
This is displayed on the Control Display. In 
order to enable and update TeleService or 
BMW Assist, a GPS signal must be present.
Enabling TeleService or BMW Assist 
For you to be able to use the services of 
TeleService or BMW Assist, these must be 
enabled. 
Leave the ignition key in position 1 during 
the entire operation.
Control Center, for principle details, refer to 
page 
:
1.
Press button.
The start menu is opened
2.
Press the controller to open the   menu
3.
Select "Communication interface" and 
press the controller
4.
Select "BMW Service settings" and 
press the controller
5.
Select "Service Status" and press the 
controller
*
*
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG