BMW 2004 645Ci Convertible Manual Do Proprietário

 187

>

When mounted at an angle, the tow bar 
will exert lateral forces, tending to push 
the vehicle sideways.

Secure the tow bar on the tow fitting 
only. Otherwise damage could result 

on other vehicle parts.

<

When starting off in the towing vehicle, 
make sure that the tow-rope is taut.

To avoid jerking and the associated 
stresses on vehicle components 

when towing, always use nylon ropes or 
nylon straps. Secure the tow rope on the 
tow fitting only. Otherwise damage could 
result on other vehicle parts.

<

Have the BMW transported with a tow 
truck with a so-called lift bar or on a load 
bed.

Do not lift vehicle by tow fitting or 
body and chassis parts, as otherwise 

damage may result.

<

Do not tow-start vehicles with an 
automatic transmission.

Jump-starting, refer to page 

<

Only tow-start vehicles with a catalytic 
converter with the engine cold. It is better 
to jump-start the engine, refer to page 

.

1.

Switch on the hazard warning flashers, 
comply with country-specific regula-
tions

2.

Turn the ignition key to position 2

3.

Engage the 3rd gear, vehicles with 
SMG, see below

4.

Have the vehicle tow-started with the 
clutch pedal completely depressed and 
slowly release the clutch. After the 
engine starts, depress the clutch pedal 
completely again

5.

Stop at a suitable location, remove the 
tow bar or rope and switch off the haz-
ard warning flashers

6.

Have the vehicle checked.

Vehicles with SMG Sequential manual 
transmission:

1.

Tow-start in selector lever position N

2.

Select sequential mode. The correct 
gear will be selected and engaged 
automatically.

Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG