BMW 2004 645Ci Convertible Manual Do Proprietário

Página de 216
Opening and closing
36
Raising and closing glass roof 
Ignition key as of position 1:
>
Briefly press the switch for raising the 
roof:
The roof opens and the sliding panel 
moves back approx. 2 in/5 cm
>
Press the switch twice beyond the 
resistance point toward the rear:
The roof opens and the sliding panel 
moves completely back
>
To close, briefly press the switch or 
push it twice beyond the resistance 
point toward the front:
The roof and sliding panel close.
Opening and closing sliding panel 
Ignition key as of position 1:
>
Push the switch up to the resistance 
point in the desired direction:
The sliding panel continues to move as 
long as you continue to hold the switch
>
Push the switch beyond the resistance 
point in the desired direction:
The sliding panel moves automatically. 
Briefly press the switch again in any 
direction to stop the movement.
After switching off ignition 
You can still operate the roof:
>
Ignition key in position 1 for approx. 
15 minutes
>
In position 0 or with the ignition key 
removed for approx. 1 minute, as long 
as a door has not been opened.
For information on using the convenience 
operation mode at the door lock or with the 
remote control, refer to page 
Anti-trapping mechanism 
If the glass roof encounters resistance 
when closing from the raised position, the 
closing action is interrupted and the glass 
roof opens.
If the sliding panel encounters resistance 
when closing within approx. 8 in/20 cm, the 
closing action is interrupted and the sliding 
panel opens approx. 8 in/20 cm.
Despite the anti-trapping mechanism, 
you should always inspect the roof's 
travel range prior to closing it, as the safety 
feature might fail to detect certain kinds of 
obstructions, such as very thin objects, and 
the roof would continue closing.
The anti-trapping mechanism for closing 
the glass roof is deactivated if the switch is 
pressed beyond the resistance point and 
held there. The closing action is immedi-
ately interrupted when you release the 
switch.
<
Following interruptions in electrical 
power supply 
After disconnecting the battery, it can 
occur that the glass roof does not move. 
The system has to be initialized. Should 
this occur, please have the roof initialized 
at your BMW center.
Manual operation 
In the event of an electrical malfunction, 
you can operate the panorama glass roof 
and the sliding panel manually.
Glass roof
1.
Remove cover on headliner in front of 
rear window. To do this, first detach the 
cover at the rear on both sides and then 
disengage by pulling downward firmly
2.
Insert the Allen wrench supplied with 
the onboard tool kit in the opening pro-
vided, refer to arrow.
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG