BMW 2004 645Ci Convertible Manual Do Proprietário

Transporting children safely

Child seat security

All of the rear belt retractors and the front
passenger's safety belt can be locked for
mounting and securing child-restraint sys-
tems.

Information regarding this is located near
the buckle latch of each safety belt.

To lock safety belt

Pull the entire length of the belt from the
belt retractor. Allow the reel to retract the
belt somewhat and engage the buckle,
then tighten the belt against the child-
restraint system. The retraction mechanism
is now locked.

To unlock safety belt

Release the buckle, remove the child-
restraint system and allow the belt retractor
to reel the belt completely in.

Coupe: child-restraint system with
tether strap

If you use a child-restraint system with a
tether strap, two additional tether anchor-
age points have been provided – refer to
the arrows in the illustration. Depending on
the location selected for sitting in the rear
passenger area, attach the tether strap to

the corresponding anchorage point to
secure the child-restraint system, as
shown in the illustration below.

Each sitting position is fitted with a head
restraint.
The head restraint must be adjusted into
the lowest possible position. Pass the
tether strap over the head restraint.

Adjust the tether strap according to
the child-restraint manufacturer's

instructions.

LATCH child-restraint fixing

LATCH: Lower Anchor and Tethers for
CHildren.

The rear outer sitting positions are pro-
vided with anchors for a LATCH child-
restraint fixing.

To fit the LATCH child-restraint fixing,
follow the operating and safety

instructions of the system manufacturer.

Access to anchorage points

The illustrations show the right rear seat as
an example. The outer anchorage points
for the LATCH child-restraint fixing are
identified by flags.