BMW Automobile 325xi Manual Do Proprietário

Página de 160
 119
Replacing components
Onboard tool kit
The onboard tool kit is stored in a compartment 
on the left-hand side underneath the cargo area 
floor panel.
Wiper blades
Changing front wiper blades
1.
Fold up the wiper arm.
2.
Remove the cover. To do so, press the hook 
on the bottom, see arrow.
3.
Fold the wiper blade upwards.
4.
Remove the wiper blade in the direction of 
the windshield, see arrow.
In order to avoid damage, make sure that 
the wiper arms are against the windshield 
before you open the engine compartment.
<
Changing rear wiper blade
1.
Fold up the wiper arm.
2.
Pull off the wiper blade, see arrow.
3.
Insert the new wiper blade and press it on 
until it audibly engages.
Lamps and bulbs
Lamps and bulbs make an essential contribu-
tion to vehicle safety. They should, therefore, 
be handled carefully. BMW recommends hav-
ing your BMW Center perform any work that 
you do not feel competent to perform yourself 
or that is not described here.
Never touch the glass of new bulbs with 
your bare fingers, as even minute 
amounts of contamination will burn into the 
bulb's surface and reduce its service life. Use a 
clean tissue, cloth or something similar, or hold 
the bulb by its base.
<
You can obtain a selection of replacement bulbs 
at your BMW Center.
When working on electrical systems, 
always begin by switching off the con-
sumer in question, otherwise short-circuits 
could result. To avoid possible injury or equip-
ment damage when replacing bulbs, observe 
Online Edition for Part-No. 01 41 0 012 353 - © 03/06 BMW AG