BMW AG Manual Do Utilizador

100

Integrated universal remote control*

The principle

The integrated universal remote control
takes the place of up to three different
control devices for different radio-
remote-controlled systems such as
gate openers and household alarm sys-
tems. The integrated universal remote
control detects and learns the signal
transmitted by the original control
device.

The signal of an original control device
can be programmed onto one of the
three memory buttons 1. The system in
question can then be operated by
means of the programmed memory
button 1. Signal transmission is indi-
cated by telltale light 2.

When the time comes to sell your car, in
the interest of your own security
remember to delete the programs
before the car leaves your possession,
see page

102

While programming is in progress
and before operating any pro-

grammed system by remote control
using the integrated universal remote
control, make sure that the area of
movement of the system in question is
clear of people, animals and inanimate
obstructions, in order to avoid possible
injury or damage. Also comply with the
safety precautions issued for the origi-
nal control device.

Checking compatibility

If this symbol is depicted on the
packaging or in the operating
instructions of the original con-

trol device, it is safe to assume that the
remote-controlled system is compatible
with the integrated universal remote
control.

You can poll a list of compatible control
devices by calling the fax number +49
(0)6838 907 283 3333. If you would like
more information, call the toll-free
HomeLink hotline at +49 (0)6838 907
277 or (from within Germany) 0800
0466 35465.

HomeLink is a registered trademark of
Johnson Controls.

1 Memory buttons

2 Telltale light

Programming a fixed-code
control device

1. Turn the ignition key to position 2
2. Initial operation: press and hold

down both outer buttons 1 for
approx. 20 seconds until telltale light
2 flashes. This clears all three mem-
ory buttons 1