BMW 745i Manual Do Proprietário

At a glance

Controls

Driving tips

Communications

Navigation

Entertainment

Mobility

Reference

101

The symbol will appear in yellow in the
Check Control and a message will appear.

You will also see the same message

in the event of a system fault

if a wheel is mounted without the
appropriate TPM electronics

if, in addition to the spare tire, addi-
tional wheels with TPM electronics are
on board.

Please refer to the additional information
supplied in the Control Display, and have
the system inspected at your BMW center.

Self-leveling suspension*

In the event of malfunction

A Check Control message
appearing together with this symbol
indicates a malfunction in the self-

leveling suspension. Please take note of
the additional information in the Control
Display.

Stop and inspect the vehicle. If the rear of
the vehicle is visibly lower than the front,
possibly accompanied by a tilt noticeable
when you compare the left rear with the
right rear, you should respond by immedi-
ately proceeding to the nearest BMW
center. Drive with appropriate caution in
the meantime. The vehicle has reduced
ground clearance and driving comfort may
be noticeably reduced. Even if the attitude
of the vehicle is normal, you should consult
the nearest BMW center if the warning
lamp indicates a system fault.

Adaptive brake lamp

The adaptive brake lamp indicates the
intensity with which you are applying your
brakes to drivers of following vehicles.

The display consists of two stages:

Normal braking:
The brake lamps in the tail lamp assem-
blies and the high-mount brake lamp on
the rear tray light up during braking

Heavy braking and braking with ABS:
The tail lamps also light up with the
same intensity as the standard brake
lamp units to enhance the warning
effect of the brake lamps.