BMW 745i Manual Do Proprietário

 111

Select "Individual" and confirm. The AUTO 
program is deactivated. 

The particle filter removes dust and pollen 
from the incoming air. The activated-char-
coal filter provides additional protection by 
filtering gaseous pollutants from the out-
side air. Your BMW center replaces this 
combined filter as a standard part of your 
scheduled maintenance. 
You can select a display of more detailed 
information in the Service Interval Display, 
refer to page 

The following settings and operating 
modes can be selected and adjusted sep-
arately on the left and right sides: 

Adjusting cooling, refer to next column

Maximum cooling, refer to next column

Adjusting air supply manually, refer to 
next column

Switching off rear air conditioner, refer 
to next column

To switch on the rear air conditioner 

>

select maximum cooling 

>

press the OFF button again 

>

select "Rear air cond." in the Control 
Display and confirm your selection, see 
below. 

When you switch on the rear air con-
ditioning, the rear cooler is switched 

on automatically, refer to page 

.

<

 

You can also set the system to 
provide the desired level of 
cooling by turning. We recom-
mend setting the system for 
moderate cooling. When you 

start off, the system reaches and then 
maintains the desired temperature settings 
as quickly as possible, both in summer and 
in winter. 

You can adjust the air supply by 
turning.

This program quickly provides 
maximum cooling. 

The system automatically switches to the 
recirculated-air mode while a high-speed 
stream of air simultaneously emerges from 
the vent outlets. For this reason you should 
ensure that these outlets are open before 
selecting this program.

The air conditioner is switched 
off. 

Press the button again to switch back on. 

Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG