BMW 745i Manual Do Proprietário

 195

The onboard tool kit is located in the lug-
gage compartment lid. 

Loosen the wingnut to open. 

The adapter for the spare key can be stored 
beneath the open-ended spanners.

To replace the blades, start by folding the 
wipers out and away from the windshield, 
refer to page 

The lamps and bulbs are essential factors 
contributing to the safety of your vehicle. 
Therefore, comply fully with the following 
instructions during bulb replacement. If you 
are not familiar with the specified proce-
dures, have the replacements carried out at 
your BMW center. 

Never touch the glass on new bulbs 
with your bare fingers, as even minute 

amounts of contamination will burn into the 
bulb's surface and reduce its service life. 
Use a clean cloth, napkin, etc., or hold the 
bulb by its metal socket.

<

 

You can obtain a selection of replacement 
bulbs at your BMW center. 

To prevent short circuits, before wor-
king on any electrical system, equip-

ment or accessory you should always 
switch it off and disconnect the cable from 
the battery's negative terminal before star-
ting. 
To avoid possible injury or equipment 
damage when changing bulbs, observe any 
instructions provided by the bulb manufac-
turer.

<

 

When maintaining the headlamps, 
please comply with the instructions in 

the separate Care manual.

<

 

For checking and adjusting headlamp 
aim, please contact your BMW 

center.

<

 

Engine compartment, left side: 
Turn the quick-release fasteners 905 coun-
terclockwise and remove the cover. 

After replacing the bulb return the cover to 
its original position and press the quick-
release fasteners down. 

Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG