BMW 745i Manual Do Proprietário

Everything under control

Selecting stored status reports for
viewing in the Control Display

Select "Car data"

Select

and

confirm

Select "Check" and confirm

The stored status reports appear in the
display. Select the desired report and
confirm your selection.

The display disappears when
the

symbol is acknowledged.

Displays after completion of trip

Selected malfunction reports generated
during the trip are shown consecutively
when you switch off the ignition.

If indicated, the following message may
also appear:

"Parking lamps on!"
This message appears when you open the
driver's door after parking. A supplemen-
tary gong is also heard.

Even with the ignition and Info Display off,
you can reactivate the screen and display
the messages.

Press the CHECK button for approx.
8 seconds, refer to page

. The stored

status reports appear again in the display.

If several messages are present, you can
continue to press the CHECK button to
view them in succession.

The Check Control function

cancels itself automatically after a brief
period

can be canceled by again pressing the
CHECK button for approximately
8 seconds.

You can select the language in which
Check Control status reports and

messages from the computer will appear,
refer to page

Computer

To select functions:

You can use the buttons in the turn signal
indicator lever to request a display from the
computer on the Info Display, starting at
the radio mode in the ignition lock.

Info Display on left

Info Display on right

A new function appears each time you
press the button.