BMW 535I XDRIVE Manual Do Proprietário

Página de 271
Te
ch
nolo
gy 
fo
r co
mfort
, c
o
nve
n
ie
nc
e an
sa
fe
ty
86
than approx. 10 seconds. DTC Dynamic Trac-
tion Control and DSC are deactivated together. 
Stabilizing and drive output promoting actions 
are no longer executed. In addition, the stability 
promoting intervention of the active steering
is deactivated, refer to page
.
A message appears on the Control Display. 
Please note any supplementary information 
that appears there.
To increase vehicle stability, activate DSC again 
as soon as possible.
Activating DSC
Press the button; the indicator lamp in the 
instrument cluster goes out.
For better control
The indicator lamp flashes: 
DSC controls the drive forces and 
brake forces. 
The indicator lamp lights up: 
DSC is deactivated.
DTC Dynamic Traction Control
DTC is a version of DSC in which the drive out-
put is optimized for particular road conditions, 
e.g., unplowed snow-covered roads. The sys-
tem assures the maximal drive output, but with 
reduced driving stability. It is therefore neces-
sary to drive with appropriate caution.
You may find it useful to briefly activate DTC 
under the following special circumstances:
>
When driving on snowy inclines, in slush, or 
on unplowed, snow-covered road surfaces
>
When rocking a stuck vehicle free or start-
ing off in deep snow or on loose ground
>
When driving with snow chains
*
Activating DTC
Press the button briefly; the DTC indicator lamp 
in the instrument cluster lights up.
For better control
The indicator lamp flashes: 
DTC controls the drive forces and 
brake forces.
The indicator lamp lights up: 
DTC is activated. 
Deactivating DTC
Press the button again; the DTC indicator lamp 
in the instrument cluster goes out.
xDrive*
xDrive is the 4-wheel drive system of your 
BMW. The combined effects of xDrive and DSC 
further optimize the traction and dynamic driv-
ing characteristics. The 4-wheel drive system 
xDrive variably distributes the drive torque to 
the front and rear axle depending on the driving 
situation and prevailing road conditions.
HDC Hill Descent Control*
The concept
HDC is a system for driving downhill in steep 
terrain. This system reduces vehicle speed on 
steep downhill gradients, thus allowing you to 
maintain even better control of your BMW 
under these conditions. The vehicle moves at 
approximately twice walking speed without 
active intervention from the driver.
HDC is available for activation at vehicle speeds 
below approx. 22 mph/35 km/h. When driving 
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG