BMW 330CI Manual Do Utilizador

112

Integrated universal remote control*

The concept

The integrated universal remote control
takes the place of up to three different
handheld transmitters belonging to var-
ious radio remote control devices, such
as door openers and home alarm sys-
tems. The integrated universal remote
control recognizes and learns the signal
sent by each original control device.

The signal of an original control device
can be programmed into one of the
three memory buttons 1. Afterwards,
the programmed memory button 1 can
be used to operate the corresponding
device. The signal transmission is indi-
cated by the indicator lamp 2.

Before selling the vehicle, clear the
memory buttons 1, refer to page

114

While programming is in progress
and before operating any pro-

grammed system by remote control
using the integrated universal remote
control, make sure that the area of
movement of the system in question is
clear of people, animals and inanimate
obstructions, in order to avoid possible
injury or damage. Also comply with the
safety precautions issued for the origi-
nal control device.

Checking compatibility

If this symbol is depicted on the
packaging or in the operating
instructions of the original con-

trol device, it is safe to assume that the
remote-controlled system is compatible
with the integrated universal remote
control.

If you have additional questions,
please consult your BMW center

or call 1-800-355-3515.
You can also visit these websites:
www.bmwusa.com or
www.homelink.com.
HomeLink is a registered trademark
owned by Johnson Controls, Inc.

1 Memory buttons

2 Indicator lamp

Programming a fixed-code
control device

Fixed-code control device

1. Turn the ignition key to position 2
2. Initial operation: press and hold

down both outer buttons 1 for
approx. 20 seconds until the indica-
tor lamp 2 flashes. The three memory
buttons 1 are cleared