BMW 2015 X1 xDrive28i Manual Do Proprietário

Changing the bulbs and lights may influence
the headlight settings. Have the headlight set‐
ting checked by a service center and corrected
if necessary after changing bulbs or lights.

The high-beam bulbs can be replaced via the
engine compartment, and the low beam and
turn signal bulbs can be replaced via a folding
cover in the wheel arch.

1 High-beam cover
2 Low beam cover
3 Turn signal bulb socket

To remove the covers:

▷

High-beams: fold out the bracket, arrow 4,
and take the cover out of the guide.

▷

Low beams: unscrew the cover, arrow 5.

Attach the covers carefully
When attaching the covers, proceed

carefully; otherwise, leaks may occur, causing
damage to the headlamp system.◀

Proceed in reverse order when attaching the
covers.

For low beams and turn signals only:

1.

Turn the wheel inward.

2.

Open the folding cover in the wheel arch.
To open the locks, turn them counter‐

clockwise all the way using a coin, for ex‐
ample.

1 High-beams/headlight flasher
2 Parking lights
3 Low beams
4 Turn signal

Wear protective goggles and gloves
Halogen bulbs are pressurized. There‐

fore, wear protective goggles and gloves. Oth‐
erwise, there is a danger of injuries if the bulb
is accidentally damaged during replacement.◀

The low beams and high-beams have separate
covers.

Seite 251

251

Online Edition for Part no. 01 40 2 954 052 - II/15