BMW 2015 428i Convertible Manual Do Proprietário

LATCH: Lower Anchors and Tether for Chil‐
dren.

Follow manufacturer's information for
LATCH child restraint systems

To mount and use the LATCH child restraint
systems, observe the operating and safety in‐
formation from the system manufacturer; oth‐
erwise, the level of protection may be re‐
duced.◀

The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lb/30 kg when the child
is restrained by the internal harnesses.

Properly engage the lower LATCH an‐
chors

Make sure that the lower LATCH anchors have
properly engaged and that the child restraint
system is resting snugly against the backrest;
otherwise, the degree of protection may be re‐
duced.◀

The corresponding symbol shows the
mounts for the lower LATCH anchors.
Seats equipped with lower anchors are
marked with a pair (2) of LATCH sym‐
bols. Use of inner lower anchors from
standard outboard LATCH positions to

install a child restraint system in the center is
not recommended. For the center position,
use the vehicle seat belt instead.

Pull the belt away from the area of the child re‐
straint system.

1.

Mount the child restraint system; refer to
the user's manual of the system.

2.

Ensure that both LATCH anchors are prop‐
erly connected.

For Canadian customers Only.
The following statement is required by Trans‐
port Canada:
This vehicle is not equipped with user-ready
tether anchorages. As such neither a child re‐
straint system, nor a booster cushion, requirer‐
ing the use of a tether strap can be properly
secured in the vehicle.

Seite 63

63

Online Edition for Part no. 01 40 2 960 547 - II/15