BMW 2014 528i Sedan Manual Do Proprietário
![BMW](https://files.manualsbrain.com/attachments/59bff3c21d02c686320f922a23b4f0fd8e167e8d/common/fit/150/50/d22aabf2d062b824edd261b72ebf0e854c720c7e6ff4ab10933d93100f3a/brand_logo.png)
Coolant
Vehicle equipment
All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equip‐
ment is also described that is not available in a
vehicle, e. g., because of the selected optional
equipment or country variant. This also applies
for safety-related functions and systems.
equipment that is offered in the model series is
described in this chapter. Therefore, equip‐
ment is also described that is not available in a
vehicle, e. g., because of the selected optional
equipment or country variant. This also applies
for safety-related functions and systems.
Hints
Danger of burns from hot engine
Do not open the cooling system while
Do not open the cooling system while
the engine is hot; otherwise, escaping coolant
may cause burns.◀
may cause burns.◀
Suitable additives
Only use suitable additives; otherwise,
Only use suitable additives; otherwise,
engine damage may occur. The additives are
harmful to your health.◀
harmful to your health.◀
Coolant consists of water and additives.
Not all commercially available additives are
suitable for the vehicle. Information about the
suitable additives are available from the service
center.
Not all commercially available additives are
suitable for the vehicle. Information about the
suitable additives are available from the service
center.
Coolant level
General information
If there is no Min. and Max. mark in the filler
neck of the coolant reservoir, have the coolant
level checked if necessary by your service cen‐
ter and add coolant as needed.
Depending on the engine installation, the cool‐
ant reservoir may be located on the opposite
side of the engine compartment.
neck of the coolant reservoir, have the coolant
level checked if necessary by your service cen‐
ter and add coolant as needed.
Depending on the engine installation, the cool‐
ant reservoir may be located on the opposite
side of the engine compartment.
Checking
1.
Let the engine cool.
2.
Turn the cap of the coolant reservoir
slightly counterclockwise to allow any ex‐
cess pressure to dissipate, and then open
it.
slightly counterclockwise to allow any ex‐
cess pressure to dissipate, and then open
it.
3.
The coolant level is correct if it lies be‐
tween the minimum and maximum marks
in the filler neck.
tween the minimum and maximum marks
in the filler neck.
Adding
1.
Let the engine cool.
2.
Turn the cap of the coolant reservoir
slightly counterclockwise to allow any ex‐
slightly counterclockwise to allow any ex‐
Seite 229
Coolant
Mobility
229
Online Edition for Part no. 01 40 2 928 000 - II/14