BMW 2015 BMW i3 Manual Do Proprietário
Information in detail
With Range Extender: total range
The total range considers the
capacity of the fuel tank as well
as the electric energy in the
high-voltage battery.
capacity of the fuel tank as well
as the electric energy in the
high-voltage battery.
Average fuel consumption
The average fuel consumption is calculated on
the basis of various distances. Standstill with
drive readiness turned off is not considered.
the basis of various distances. Standstill with
drive readiness turned off is not considered.
Current fuel consumption
Displays the current energy consumption. The
efficiency of the driving can be monitored.
efficiency of the driving can be monitored.
Average speed
Periods when vehicle is parked with drive read‐
iness switched off are not included when cal‐
culating average speed.
iness switched off are not included when cal‐
culating average speed.
Resetting average values
Press and hold the onboard computer button
on the turn signal lever.
on the turn signal lever.
Speed limit detection
Description of the speed limit detection, refer
to page
to page
Trip computer
The vehicle features two types of board com‐
puters.
puters.
▷
"Onboard info": the values can be reset as
often as necessary.
often as necessary.
▷
"Trip computer": the values provide an
overview of the current trip.
overview of the current trip.
Resetting the trip computer
On the Control Display:
1.
"Vehicle info"
2.
"Trip computer"
3.
"Reset": all values are reset.
"Automatically reset": all values are reset
approx. 4 hours after the vehicle came to a
standstill.
"Automatically reset": all values are reset
approx. 4 hours after the vehicle came to a
standstill.
Display on the Control Display
Display the computer or trip computer on the
Control Display.
Control Display.
1.
"Vehicle info"
2.
"Onboard info" or "Trip computer"
Resetting the fuel consumption or
speed
On the Control Display:
1.
"Vehicle info"
2.
"Onboard info"
3.
"Consumpt." or "Speed"
4.
"Yes"
Speed warning
The concept
Displays a speed, when reached, should cause
a warning to be issued.
The warning is repeated if the vehicle speed
drops below the set speed once by at least
3 mph/5 km/h.
a warning to be issued.
The warning is repeated if the vehicle speed
drops below the set speed once by at least
3 mph/5 km/h.
Displaying, setting or changing the
speed warning
On the Control Display:
1.
"Settings"
2.
"Speed"
3.
"Warning at:"
4.
Turn the controller until the desired speed
is displayed.
is displayed.
5.
Press the controller.
Speed warning is stored.
Seite 87
Displays
Controls
87
Online Edition for Part no. 01 40 2 960 865 - II/15