BMW 2015 BMW i3 Manual Do Proprietário

Página de 236
Switch off any functions that
are not currently needed
Functions such as the rear window defroster
require a lot of energy and reduce the range,
especially in city and stop-and-go traffic.
Reel off these functions if they are not needed.
The ECO PRO and ECO PRO+ driving pro‐
grams support the energy-conserving use of
comfort features. They automatically perform a
partial or complete deactivation of these func‐
tions.
Have maintenance carried
out
Have vehicles maintained regularly to achieve
optimal vehicle efficiency and operating life.
The maintenance should be carried out by
your service center.
Also note the BMW Maintenance System, refer
to page 
ECO PRO and ECO PRO+
The concept
ECO PRO and ECO PRO+ support an efficient
driving style. To this end, the control of the
drive is optimized for moderate acceleration,
and adapted to lighting and comfort features,
such as climate control output. Some vehicle
functions cannot be used during activated
drive mode ECO PRO and ECO PRO+.
In addition, context-sensitive instructions can
be displayed that assist in driving efficiently.
At a glance
With ECO PRO and ECO PRO+ different set‐
tings are made in the respective mode.
ECO PRO
Reduce heat output or heating cycle for ex‐
terior mirror, rear window and seat heating.
What reduces the the cooling and heating
output of the climate control system.
The speed is limited to an adjustable maxi‐
mum value between 50 mph/80 km/h and
80 mph/130 km/h. To intentionally exceed
the speed limit, press the accelerator pedal
all the way down.
ECO PRO+
The cooling and heating output of the climate
control system are additionally deactivated on
ECO PRO+ activation.
The low beams are dimmed.
The maximum speed is limited to
55 mph/90 km/h. In special situations, the
speed limit can be consciously exceeded by
applying the accelerator pedal.
Activate ECO PRO and ECO PRO+
Press button repeatedly until ECO
PRO or ECO PRO+ is displayed in the
instrument cluster.
Configuring ECO PRO
Via the Driving Dynamics Control
1.
Activate ECO PRO.
2.
"Configure ECO PRO"
3.
Configure the program.
Via the iDrive
1.
"Settings"
2.
"ECO PRO mode"
Or
1.
"Settings"
2.
"Driving mode"
3.
"Configure ECO PRO"
Configure the program.
Seite 155
Increase range
Driving tips
155
Online Edition for Part no. 01 40 2 960 865 - II/15