BMW 2015 BMW i3 Manual Do Proprietário
▷
Pull the switch beyond the resistance
point.
The window closes automatically. Pulling
again stops the motion.
The window closes automatically. Pulling
again stops the motion.
See also: closing by means of Comfort Access,
refer to page
refer to page
Pinch protection system
Danger of jamming even with pinch pro‐
tection
tection
Even with the pinch protection system, check
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀
No window accessories
Do not install any accessories in the win‐
Do not install any accessories in the win‐
dow's range of movement; otherwise, the
pinch protection system will be impaired.◀
pinch protection system will be impaired.◀
If closing force exceeds a specific margin as a
window closes, closing is interrupted.
The window reopens slightly.
window closes, closing is interrupted.
The window reopens slightly.
Closing without the pinch protection
system
Keep the closing path clear
Monitor closing and make sure that the
Monitor closing and make sure that the
closing path of the window is clear; otherwise,
injuries may result.◀
injuries may result.◀
E.g. danger from the outside or ice might pre‐
vent window from closing properly - proceed
as follows:
vent window from closing properly - proceed
as follows:
1.
Pull the reel past the resistance point and
hold it there.
The pinch protection is limited and the
window reopens slightly if the closing force
exceeds a certain margin.
hold it there.
The pinch protection is limited and the
window reopens slightly if the closing force
exceeds a certain margin.
2.
Pull the reel past the resistance point again
within approx. 4 seconds and hold it there.
The window closes without jam protection.
within approx. 4 seconds and hold it there.
The window closes without jam protection.
Glass sunroof, powered
General information
The glass sunroof is operational when the igni‐
tion is switched on.
tion is switched on.
Keep the closing path clear
Monitor closing and make sure that the
Monitor closing and make sure that the
closing path of the glass sunroof is clear; oth‐
erwise, injuries may result.◀
erwise, injuries may result.◀
Take the remote control with you
Take the remote control with you when
Take the remote control with you when
leaving the vehicle so that children, e.g., can‐
not operate the glass sunroof and injure them‐
selves.◀
not operate the glass sunroof and injure them‐
selves.◀
Tilting the glass sunroof
Push switch briefly upward.
▷
The closed glass sunroof is
tilted.
tilted.
▷
The opened glass sunroof
closes until it is in its tilted
position. The sliding visor
does not move.
closes until it is in its tilted
position. The sliding visor
does not move.
Opening/closing the glass sunroof and
sliding visor together
▷
Press the reel in the desired
direction to the resistance
point and hold it there.
The glass sunroof moves as
long as the reel is held
down.
direction to the resistance
point and hold it there.
The glass sunroof moves as
long as the reel is held
down.
Seite 51
Opening and closing
Controls
51
Online Edition for Part no. 01 40 2 960 865 - II/15