BMW 2015 BMW i3 Manual Do Proprietário
▷
While the driver's safety belt is unbuckled
with driver's door open and low beams off.
with driver's door open and low beams off.
▷
When the batteries' state of charge is low,
if the low beams are turned off.
if the low beams are turned off.
▷
The low beams switch to parking lights af‐
ter approx. 15 minutes of no use.
ter approx. 15 minutes of no use.
Drive readiness
If drive readiness is switched on, the vehicle
ready to drive and the READY signal, refer to
page
ready to drive and the READY signal, refer to
page
ter.
All vehicle systems are ready for operation.
Most of the indicator and warning lights in the
instrument cluster light up for a varied length
of time.
Activated drive readiness is the equivalent of a
running engine in conventional vehicles. Deac‐
tivated engine readiness is equivalent to
switching the ignition off.
To save battery power when parking, switch
off drive readiness and any unnecessary elec‐
tronic systems/power consumers.
Drive readiness is switched off automatically:
All vehicle systems are ready for operation.
Most of the indicator and warning lights in the
instrument cluster light up for a varied length
of time.
Activated drive readiness is the equivalent of a
running engine in conventional vehicles. Deac‐
tivated engine readiness is equivalent to
switching the ignition off.
To save battery power when parking, switch
off drive readiness and any unnecessary elec‐
tronic systems/power consumers.
Drive readiness is switched off automatically:
▷
When opening or closing the driver door, if
the driver's safety belt is unbuckled.
the driver's safety belt is unbuckled.
Note
If drive readiness is switched on, the system
automatically switches to the radio-ready state
when the door is opened and the driver's
safety belt is unbuckled, or if the lights are
turned off or the daytime running lights are ac‐
tivated.
automatically switches to the radio-ready state
when the door is opened and the driver's
safety belt is unbuckled, or if the lights are
turned off or the daytime running lights are ac‐
tivated.
Selector lever position P with drive readi‐
ness switched off
ness switched off
When drive readiness is switched off, selector
lever position P is automatically engaged.
When in an automatic car wash, e.g., ensure
that the drive readiness is not switched off ac‐
cidentally, otherwise, wheels can lock up.◀
lever position P is automatically engaged.
When in an automatic car wash, e.g., ensure
that the drive readiness is not switched off ac‐
cidentally, otherwise, wheels can lock up.◀
Drive readiness in detail
Hints
Do not leave the vehicle unattended
Do not leave the vehicle unattended with
Do not leave the vehicle unattended with
drive readiness switched on; otherwise, it may
pose a risk.◀
pose a risk.◀
Before leaving the vehicle
Before leaving the vehicle, with drive
Before leaving the vehicle, with drive
readiness switched on engage lever in position
P P and set the parking brake; otherwise, the
vehicle is not secured against rolling away.◀
P P and set the parking brake; otherwise, the
vehicle is not secured against rolling away.◀
Switching on drive readiness
1.
Close the driver's door.
2.
Depress the brake pedal.
3.
Press the Start/Stop button.
Drive readiness is switched on.
Display in the instrument cluster
The READY display indicates
that the vehicle is ready for driv‐
ing.
that the vehicle is ready for driv‐
ing.
Display on the Start/Stop button
General information
Drive readiness is also displayed through light
indicators on the Start/Stop button.
indicators on the Start/Stop button.
Seite 65
Driving
Controls
65
Online Edition for Part no. 01 40 2 960 865 - II/15