BMW 2015 BMW i3 Manual Do Proprietário

The rain sensor automatically controls the time
between wipes depending on the intensity of
the rainfall. The sensor is located on the wind‐
shield, directly behind the interior rearview mir‐
ror.

Press button on the wiper lever.
Wiping is started. If the vehicle is equipped
with a rain sensor: LED in wiper lever lights up.
When wipers are frozen to windshield, wiper
operation is deactivated.

Deactivate the rain sensor in car washes
Deactivate the rain sensor when passing

through an automatic car wash; otherwise, un‐
intentional wiping can cause damages.◀

Turn the thumbwheel.

Pull the wiper lever towards you.
The system sprays washer fluid on the wind‐
shield and activates the wipers briefly.

Do not use the washer system at freezing
temperatures

Do not use the washers if fluid could freeze
onto the windshield which might impede your
viewing field. Therefore use antifreeze fluid.
Avoid using the washer when the reservoir is
empty; operation might damage pump.◀

The windshield washer nozzles are automati‐
cally heated while operating readiness is
switched on.

Turn the switch from idle position 0 upward,
arrow 1: interval mode. When reverse gear is
engaged, the system switches to continuous
operation.

Seite 73

73

Online Edition for Part no. 01 40 2 960 865 - II/15