BMW 2011 X6 M Manual Do Proprietário
La
mps
112
Welcome lamps are activated and are
stored for the remote control currently in use.
Pathway lighting
If you activate the headlamp flasher after
switching off the ignition with the lamps
switched off, the low beams come on and
remain on for a certain time.
switching off the ignition with the lamps
switched off, the low beams come on and
remain on for a certain time.
Setting the duration or deactivating
1.
"Settings"
2.
"Lighting"
3.
"Pathway light.:"
4.
Set a time of duration or 0 s to deactivate
the function.
the function.
The setting is stored for the remote control cur-
rently in use.
rently in use.
Daytime driving lamps*
The daytime driving lamps light up in position
0,
1 and 3. If the light switch remains in position 1,
the parking lamps light up after the ignition is
switched off.
the parking lamps light up after the ignition is
switched off.
Activating/deactivating daytime
driving lamps
1.
"Settings"
2.
"Lighting"
3.
"Daytime running lamps"
Daytime driving lamps are activated and are
stored for the remote control currently in use.
Adaptive Light Control*
The concept
Adaptive Light Control is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
In sharp curves, e.g. serpentines, or during turn-
ing, up to a speed of approx. 45 mph/70 km/h
one of the two fog lamps
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
In sharp curves, e.g. serpentines, or during turn-
ing, up to a speed of approx. 45 mph/70 km/h
one of the two fog lamps
*
is switched on as a
turning lamp. This provides improved illumina-
tion of the area inside the curve.
tion of the area inside the curve.
Activating Adaptive Light Control
With the ignition switched on, turn the light
switch to position
switch to position
The turning lamps are automatically switched
on depending on the steering angle or the use
of turn signals.
Standstill function
on depending on the steering angle or the use
of turn signals.
Standstill function
*
: to avoid blinding oncoming
traffic, the Adaptive Light Control directs light
towards the front passenger side when the
vehicle is at a standstill. When driving in reverse,
both turning lamps are active.
towards the front passenger side when the
vehicle is at a standstill. When driving in reverse,
both turning lamps are active.
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG