BMW 2011 X6 M Manual Do Proprietário

Página de 312
 265
3.
Apply gentle pressure to the bulb while 
turning it to the left for removal and replace-
ment.
4.
Re-engage the bulb holder so that it audibly 
clicks into place.
5.
Before installing the cap, unclip the cargo 
area lamp. 
Then lay the cap on its upper side and close 
it, refer to arrow.
6.
Position the cargo area lamp and clip it in, 
refer to arrow.
License plate lamp
5-Watt bulb, C5W
1.
Slide the lamp to the right with a screw-
driver, refer to arrow
1.
2.
Remove the lamp, arrow
2.
3.
Replace the bulb.
4.
Reinstall the lamp.
Center brake lamp
This lamp uses LED technology for operation. 
In case of a defect, please go to a BMW Sports 
Activity Vehicle Center or a workshop that 
works according to BMW repair procedures 
with correspondingly trained personnel.
BMW X6: changing lamps
Xenon lamps
These bulbs have a very long service life and 
the probability of a failure is very low. If a lamp 
should nevertheless fail, you can continue driv-
ing cautiously with fog lamps
*
 provided that 
this is permitted by the country-specific laws.
Have work on the xenon light unit includ-
ing changing the bulb carried out only by 
your BMW Sports Activity Vehicle Center or a 
workshop that works according to BMW repair 
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the 
system, there is a danger of fatal injuries when 
work is carried out improperly.
<
Parking lamps and roadside parking 
lamps, daytime driving lamps*
35-Watt bulb, H8
The bulb is pressurized. Therefore, wear 
safety glasses and protective gloves. 
Otherwise there is a danger of injuries if the 
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG