BMW 2011 X6 M Manual Do Proprietário

 91

Press the button.

>

On: LED lights up.

>

Off: LED goes out.

If Top View is displayed, switch on the rear view 
camera using iDrive, refer to page

.

The approach to an object can be shown on the 
Control Display.
When the distance to an object is small, the 
PDC display correspondingly shows a red bar in 
front of the vehicle.

The display appears as soon as Top View is 
activated.
If the last image selected was the rear view 
camera, this is displayed again. To switch to 
Top View:

1.

Select the 

 "Switch off rear view cam-

era" on the Control Display.

2.

Press the controller.

The setting is stored for the remote control cur-
rently in use.

With Top View activated:

1.

Select the 

 "Rear view camera" symbol.

2.

Press the controller.

The image of the rear view camera is displayed. 
The setting is stored for the remote control cur-
rently in use.

With Top View switched on:

1.

Select the 

symbol.

2.

Turn the controller until the desired setting 
is displayed and then press the controller.

With Top View switched on:

1.

Select the 

symbol.

2.

Turn the controller until the desired setting 
is displayed and then press the controller.

>

The static, red turning line shows the lateral 
space required when the wheel is fully 
turned.

>

The variable, green pathway lines assist you 
in estimating the amount of lateral space 
actually required.
The pathway lines depend on the current 
steering angle and are continuously 
adapted to movements of the steering 
wheel.

1.

Select the 

symbol.

2.

Press the controller.

Turning lines and pathway lines are displayed.

Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG

Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG