BMW 2004 760i Sedan Manual Do Proprietário

 83

These status messages and malfunction 
reports are signaled by a gong. Simulta-
neous defects will be displayed consecu-
tively. These messages cannot be deleted, 
and they remain in the display until the 
problem is corrected. Supplementary infor-
mation is also shown on the Control Dis-
play, refer to Automatic display on the Con-
trol Display. 

These status messages and malfunction 
reports appear in the Info Display for 
approx. 20 seconds. 

Briefly press the CHECK button on the turn 
signal indicator lever to cancel the mes-
sage in the display, if allowed by priority 
rating. 

Requesting stored messages using the 
Control Center see there. 

Depending on the status of the monitored 
systems, the Check Control symbol 

 is 

displayed in different colors. 

Faults are present in the monitored sys-
tems. Depending upon how serious the 
problem is, a supplementary message may 
also appear on the Control Display. 

Requesting stored messages using the 
Control Center see there. 

The symbol in the status line also indi-
cates the status of the Service Interval 

Display, refer to page 

<

 

These supplementary messages are 
intended to assist you in assessing the 
severity of malfunctions; they provide you 
with the information you need to decide on 
the best way to respond. 

Select 

 and confirm to switch off the dis-

play. 

1.

Select "Car data" 

2.

Select   

 and confirm

3.

Select "Check" and confirm 

4.

The stored status reports appear in the 
display. Select the desired report and 
confirm. 

Online Edition for Part No. 01 41 0 157 670 - © 08/03 BMW AG