BMW 2004 M3 Convertible Manual Do Proprietário

Dynamic Stability Control DSC

The concept

DSC maintains vehicle stability, even in
critical driving situations.

The system optimizes vehicle stability
during acceleration and when starting
from a full stop, as well as optimizing
traction. In addition, it recognizes
unstable vehicle conditions, such as
understeering or oversteering, and,
within physically feasible limits, helps
keeping the vehicle on a steady course
by reducing the engine speed and
brake applications to the individual
wheels.

The system starts up automatically
each time you start the engine.

The laws of physics cannot be
repealed, even with DSC. The

results of driving irresponsibly rest with
the driver. We therefore urge you to
avoid using the additional safety margin
of the system as an excuse for taking
risks. Do not make any modifications to
the DSC system. Allow only authorized
technicians to perform service proce-
dures on the DSC.
At first, you may need some time to
become accustomed to this system's
intervention. However, it guarantees
optimum drive force and at the same
time, the best possible vehicle stabil-
ity.

Indicator lamp

The indicator lamp in the instru-
ment cluster will go out shortly
after the ignition has been

switched on, refer to page

> Indicator lamp flashes: the system is

active and is controlling the drive
torque based on driving conditions

> If the indicator lamp fails to go out

after the engine has been started, or
if it comes on during normal driving
and stays on: the system has been

deactivated via the button or is
defective.
Please consult your BMW center for
repairs.

You can continue to drive the vehicle
normally without DSC.