BMW 2004 525i Sedan Manual Do Proprietário

70

To select functions:

As of ignition key position 1, you can use 
the BC button in the turn signal indicator 
lever to call up computer information in the 
instrument cluster.

A new function appears each time you 
press the BC button briefly. 

The display sequence:

>

Cruising range

>

Average speed 

>

Average fuel consumption.

Displays the estimated cruising range 
available with the remaining fuel. The sys-
tem calculates the cruising range based on 
operating conditions and the amount of fuel 
remaining in the tank. The basis for the cal-
culations is the average fuel consumption 
over the preceding 20 miles/30 km.

Always refuel as soon as possible 
once your cruising range falls to 

below 30  miles/50  km, as otherwise engine 

functions are not ensured and damage can 
occur.

<

Refueling is only registered by the com-
puter for fuel amounts above approx. 
1.3 gallons/5 liters. 

The average fuel consumption is calculated 
for the time during which the engine is run-
ning. 

You can use the Control Display to view 
your fuel consumption rate over two differ-
ent distances, refer to Computer or Trip 
computer. 

To reset the average fuel consumption to 
zero: press the BC button in the turn signal 
indicator lever for approx. 2 seconds. 

Periods with the vehicle parked and the 
engine switched off are not included in the 
calculations of average speed.

To reset the average speed to zero: press 
the BC button in the turn signal indicator 
lever for approx. 2 seconds. 

You can also call up the computer via the 
Control Center, for principle details, refer to 
page 

1.

Open the start menu by pressing the 
button

2.

Move the controller to the right to open 
"Navigation".
On vehicles without navigation: open 
"Car Data" 

Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG