BMW 2004 525i Sedan Manual Do Proprietário

Technology for comfort, convenience and safety

CBC Cornering Brake Control

CBC is a supplement to ABS. It provides
further enhancements in vehicle stability
and steering response during lane changes
and cornering at high rates of lateral accel-
eration.

EBV Electronic Brake Force
Distribution

EBV controls the brake system's applica-
tion pressure at the rear wheels to ensure
stable deceleration.

In case of malfunction

If the brake system warning lamp
lights up in red, appearing together
with the yellow indicator lamps for
ABS and DSC:
The driving stability control has
failed.

If all three lamps light up yellow:
Fault in the driving stability control.

The EBV electronic brake-force distribution
is active.

While you may continue, you should
remember to proceed cautiously and drive
defensively while avoiding full brake appli-
cations.
Please have the system checked at the
nearest BMW center.

If a message appears on the Control Dis-
play, please note the supplementary infor-
mation.
You can find more information on the
Check Control starting on page

Indicator and warning lamps for
Canadian models.

Driving stability control/
DSC Dynamic Stability
Control

The concept

DSC maintains vehicle stability, even in
critical driving situations.

The DSC is operational every time you start
the engine. DSC includes the functionality
of the DTC Dynamic Traction Control and
DBC Dynamic Brake Control, refer to
page

The system optimizes vehicle stability dur-
ing acceleration and when starting from a
full stop, as well as optimizing traction. The
system recognizes any tendency for the
vehicle to assume an unstable attitude
such as oversteer or understeer; it then
counteracts this tendency with a combina-
tion of graduated reductions in engine
torque and selective braking intervention at
individual wheels. DSC provides optimal
stability within the limits defined by the
laws of physics.

Indicator lamps

The indicator lamp in the instrument
cluster goes out soon after you start
the engine.

If the indicator lamp flashes:
DSC is regulating the drive and braking
forces.

If the indicator lamp lights up permanently:
DSC has been switched off using the but-
ton.

If the indicator lamp and the brake
warning lamp light up permanently:
Malfunction in DSC, DTC and DBC.

When the system is off, the stability main-
tenance functions described above are no
longer available. The vehicle will remain
completely operational, however, without
DSC.
Please respond to any malfunctions by
referring the problem to your BMW center.