ing off the headlamps, you can use the
headlamp flasher control to activate
the low beams for a period of roughly
40 seconds. You also have the options of
extending this period or, as an alternative,
having this function deactivated.

Lights on warning

If you switch off the ignition while the head-
lamps are on, when you subsequently open
the driver's door a gong will sound for sev-
eral seconds, while the Check Control will
provide you with a message

Daytime driving lamps*

If you wish, you can leave the light switch in
the low-beam position.

Always observe all applicable laws govern-
ing the use of daytime driving lamps.

You can switch on the parking lamps when
needed using the standard procedure
described under Parking lamps.

You can have the daytime driving
lamps on your vehicle programmed to

operate as desired.

Automatic headlamp control

When you set the switch to this
position, the system activates and
switches on and off the low beams

in response to changes in ambient light
conditions, for instance, in tunnels, at dawn
and dusk, and in rain and snow. The green
indicator lamp next to the symbol is illumi-
nated when the low beams are on.

Following automatic activation, the
vehicle's external lighting remains on

when you switch on the fog lamps.

The automatic headlamp control can-
not serve as a substitute for your per-

sonal judgment in determining when the
lamps should be switched on in response
to ambient lighting conditions. For exam-
ple, the system cannot detect fog. To avoid
safety risks, you should always switch on
the lamps manually under these condi-
tions.

You can have the sensitivity of the
headlamp control system adjusted on

your vehicle.

Adaptive Head Light*

The concept

Adaptive Head Light is a variable headlamp
control system that enables dynamic illumi-
nation of the road surface. Depending on
the steering angle and other assumptions,
the light from the headlamp follows the
course of the road.