BMW 2004 745i Sedan Manual Do Proprietário

Under the hood

196

The oil quantity between the two marks
of the dipstick is approx. 1.65 US quarts/
1.5 liter. Do not fill beyond the upper mark
on the dipstick. Excess oil can damage the
engine.

Adding engine oil

Wait until the level has dropped to just
above the lower mark or a message
appears in the Check Control before add-
ing oil.

BMW engines are designed to oper-
ate without additives, and their use

could even lead to damage in some cases.
This also applies to the automatic transmis-
sion, the differential and the power steering
system.

Recommendation: have your oil changed
at your BMW center.

Continuous exposure to used oil has
caused cancer in laboratory testing.

For this reason, any skin areas that come
into contact with oil should be thoroughly
washed with soap and water.
Store oil, grease, etc., well out of the reach
of children; always observe all warning
labels on the containers.

Always observe all applicable rules
and regulations for environmental

protection when disposing of used oil.

Specified engine oils

The quality of the engine oil selected has
critical significance for the operation and
service life of an engine. BMW approves
only specific oils after confirming their suit-
ability for use in its vehicles with extensive
testing.

Use only approved BMW High Perfor-
mance Synthetic Oil.

If you are unable to obtain BMW High Per-
formance Synthetic Oil, you can add small
amounts of another synthetic oil between
oil changes. Use only oils with the API SH
specification or higher.

Ask your BMW center for details con-
cerning the specific BMW High Per-

formance Synthetic Oil or synthetic oils
which have been approved.

You can also call BMW of North America
at 1-800-831-1117 or visit this website:
www.bmwusa.com to obtain this informa-
tion.

Viscosity ratings

Viscosity is the oil flow rating as defined in
SAE classes.

The selection of the correct SAE class
depends on the climatic conditions in the
area where you typically drive your BMW.

Approved oils are in SAE classes
5W-40 and 5W-30.

These oils may be used for driving in all
ambient temperatures.

Coolant

Do not add coolant to the cooling
system when the engine is hot.

Escaping coolant can cause burns.
Antifreeze and anticorrosion agents are
hazardous to health. Always store these
agents in tightly-closed original containers
kept well away from the reach of children.