BMW 2004 325Ci Convertible Manual Do Utilizador

Página de 186
71
Driving
Ignition lock
Ignition key positions
0 Steering locked
1 Steering unlocked
2 Ignition on
3 Start engine
Steering locked
The key can only be inserted and 
removed in this position.
After removing the key, turn the steer-
ing wheel slightly to the left or right until 
you hear the lock engage.
If the key is not removed, an acoustic 
signal sounds when the driver door is 
opened.
Vehicles with automatic transmis-
sion:
Do not move the selector lever from 
position P until the engine is running, 
ignition key position 2.
Your vehicle is equipped with an inter-
lock. Therefore, the ignition key cannot 
be turned to position 0 or removed until 
the selector lever is in position P.
<
Vehicles with manual transmis-
sion:
Step on the clutch when starting the 
vehicle. A lockout prevents the engine 
from starting if the clutch is not 
depressed.
<
Steering unlocked
You will find that it is often easier to turn 
the ignition key from position 0 to posi-
tion 1 when you move the steering 
wheel slightly to help disengage the 
lock.
Individual electrical accessories are 
ready for operation.
Starting the engine
Do not allow the engine to warm 
up by leaving it running while the 
vehicle remains stationary. Instead, 
drive off immediately at a moderate 
engine speed.
<
Do not allow the engine to run in 
enclosed spaces. Otherwise, 
breathing the exhaust fumes can lead 
to unconsciousness and death. The 
exhaust gases contain carbon monox-
ide, an odorless and colorless, but 
highly toxic gas. Do not leave the vehi-
cle unattended with the engine running. 
An unattended vehicle with a running 
engine represents a safety hazard. 
When driving, standing at idle or park-
ing the vehicle, take care to avoid con-
tact between the hot exhaust system 
and flammable materials – grass, hay, 
leaves, etc. Such contact could lead to 
a fire, resulting in serious personal 
injury and property damage.
<
Start the engine. Do not press the 
accelerator pedal.
Do not actuate the starter for too 
short a time, but do not actuate it 
for more than approx. 20 seconds. 
Release the ignition key immediately 
when the engine starts.
<
Overview
Controls
Maintenance
Repairs
Data
Index
Online Edition for Part-No. 01 41 0 157 599 - © 09/03 BMW AG