BMW 01 41 0 155 307 Manual Do Utilizador
137
n
Index
Data
Technology
Repairs
Car care
Controls
Overview
Engine oil
Coolant
Comply with the applicable envi-
ronmental laws regulating the
ronmental laws regulating the
disposal of used oil.
<
Recommendation: have the oil changed
by your BMW center only.
by your BMW center only.
Continuous exposure to used oil
has caused cancer in laboratory
has caused cancer in laboratory
testing.
For this reason, thoroughly wash any
areas of skin that come into contact
with oil using soap and water.
Always store oils, grease and similar
materials so that they are inaccessible
to children. Comply with warning labels
and information on containers.
For this reason, thoroughly wash any
areas of skin that come into contact
with oil using soap and water.
Always store oils, grease and similar
materials so that they are inaccessible
to children. Comply with warning labels
and information on containers.
<
Do not add coolant to the cooling
system when the engine is hot.
system when the engine is hot.
If you do, escaping coolant can cause
burns.
To avoid the possibility of damage later
on, never use anything other than
factory-approved, nitrite- and amino-
free extended-duty antifreeze with
corrosion inhibitor. Your BMW center is
familiar with the approved specifica-
tions.
Antifreeze and anticorrosion agents are
hazardous to health. You should always
store it in its original container and in a
location that is inaccessible to children.
Extended-duty antifreeze with corro-
sion inhibitor contains the flammable
substance ethylene glycol. Therefore,
do not spill antifreeze with corrosion
inhibitor on hot engine parts. It could
ignite and cause burns.
burns.
To avoid the possibility of damage later
on, never use anything other than
factory-approved, nitrite- and amino-
free extended-duty antifreeze with
corrosion inhibitor. Your BMW center is
familiar with the approved specifica-
tions.
Antifreeze and anticorrosion agents are
hazardous to health. You should always
store it in its original container and in a
location that is inaccessible to children.
Extended-duty antifreeze with corro-
sion inhibitor contains the flammable
substance ethylene glycol. Therefore,
do not spill antifreeze with corrosion
inhibitor on hot engine parts. It could
ignite and cause burns.
<
Comply with the applicable envi-
ronmental laws regulating the
ronmental laws regulating the
disposal of extended-duty antifreeze
with corrosion inhibitor.
with corrosion inhibitor.
<
Checking coolant level
Correct coolant level when the engine
is cold (approx. +68 7/+20 6):
is cold (approx. +68 7/+20 6):
Unscrew the cap from the expansion
tank.
tank.
The coolant level is correct when the
upper end of the red float is at least
even with the upper edge of the filler
neck (refer to the arrow in the illustra-
tion), but no more than 0.8 in (2 cm)
above it – that is, up to the second mark
on the float (refer also the schematic
diagram next to the filler neck).
upper end of the red float is at least
even with the upper edge of the filler
neck (refer to the arrow in the illustra-
tion), but no more than 0.8 in (2 cm)
above it – that is, up to the second mark
on the float (refer also the schematic
diagram next to the filler neck).
46cde036
Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG