BMW 01 41 0 155 307 Manual Do Utilizador

Alarm system

The indicator lamp flashes for
10 seconds when the system is
disarmed: an attempted entry has
been detected in the period since the
system was armed.

Following triggering of an alarm, the
indicator lamp will flash continuously.

Avoiding unintentional alarms

The tilt alarm sensor and interior motion
sensor may be switched off at the same
time. Doing this prevents a false alarm
from being triggered (in garages with
elevator ramps, for instance), or when
the vehicle is transported by trailer or
train:

Lock the vehicle (= arm the system)
twice. Press button 2 on the remote
control twice in succession or lock the
vehicle twice with the key (refer to
page

The indicator lamp lights up briefly and
then flashes continuously. The tilt alarm
sensor and the interior motion sensor
are deactivated as long as the system is
armed.

Reset the alarm system in order to
reactivate both the tilt sensor alarm
system and interior motion sensor.

Interior motion sensor

The transmitter and receiver of the inte-
rior motion sensor are located in a trim
panel in the vehicle's roof.

In order for the interior motion sensor
to function properly, the windows and
sliding/tilt sunroof must be completely
closed.

However, be sure to deactivate the
interior motion sensor (refer to the
previous column "Avoiding uninten-
tional alarms"), when you wish to leave
the windows or the tilt/sunroof open.

460de159