BMW 01 41 0 155 307 Manual Do Utilizador

Index

Data

Technology

Repairs

Car care

Controls

Overview

Parking brake

To engage

The parking brake is designed primarily
to prevent the vehicle from rolling when
it is parked. It acts on the rear wheels.

The lock engages automatically when
you lift the lever, and the indicator lamp
in the instrument panel comes on when
the ignition key is in position 2. Refer to
page

To release

Pull up slightly on the lever, press the
button (arrow) and lower the lever.

460us024

If, in exceptional circumstances,
it should be necessary to apply the

parking brake while the vehicle is in
motion, do not pull the lever with exces-
sive pressure. Keep your thumb
pressed against the release button
while carefully pulling the lever up to
apply moderate pressure.
Excessive pressure can lead to over-
braking and loss of traction (fishtailing)
at the rear axle.
The brake lamps do not come on when
the parking brake is applied.
Vehicles with manual transmission:
Always apply the parking brake when
parking on slopes and inclined surfaces,
since placing the lever in 1st gear or
reverse may not provide adequate
resistance to rolling.
Vehicles with automatic transmission:
Place the selector lever in "Park."

To avoid corrosion and one-sided
braking, apply the parking brake lightly
from time to time when coasting to a
standstill (at a traffic signal, for
instance), provided that it is safe to do
so.