BMW 01 41 0 155 307 Manual Do Utilizador
75
n
Index
Data
Technology
Repairs
Car care
Controls
Overview
Graphic display
The following information and/or condi-
tions are indicated using symbols,
starting with the ignition key position 2,
until the condition has been corrected:
tions are indicated using symbols,
starting with the ignition key position 2,
until the condition has been corrected:
1 Inspect the low-beam and high-beam
headlamps, as well as the side lamps
2 Door open
3 Tailgate open
4 Check brake and brake lamps
When you open the driver's door after
stopping with the lights still on, a
warning signal sounds for LIGHTS ON.
stopping with the lights still on, a
warning signal sounds for LIGHTS ON.
460de083
If you wish to have a permanent time
display, you can make this adjustment
in the radio display (refer to the Radio
Owner's Manual).
display, you can make this adjustment
in the radio display (refer to the Radio
Owner's Manual).
You can adjust the clock and the time
display in the car radio as follows.
display in the car radio as follows.
Adjustments
From ignition key position 1
To set ahead: turn the right button to
the right.
the right.
To set back: turn the right button to the
left.
left.
The adjustment speed will increase the
longer you continue to hold the button
turned to the left.
longer you continue to hold the button
turned to the left.
To change the display mode: press the
knob briefly.
Every time you press the knob, the
clock display alternates between the
12-hour or 24-hour mode.
knob briefly.
Every time you press the knob, the
clock display alternates between the
12-hour or 24-hour mode.
In ignition key position 0:
The time is displayed for a few seconds
after you press the left button (refer to
"Odometer" on page
The time is displayed for a few seconds
after you press the left button (refer to
"Odometer" on page
).
460us078
Check Control
Clock
Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG