Black Box X.25 PAD-2 Folheto
Compliance: CE (EN55022,
EN 50082-1, EN 60950) Class A;
FCC Class A, IC Class/classe A
FCC Class A, IC Class/classe A
Interfaces:
Channel 1 (to packet-switched
synchronous link):
MX320A-HS: ITU V.35
MX320A-HS: ITU V.35
proprietarily pinned on
DB25, DTE;
DB25, DTE;
MX325A-HS: EIA/TIA RS-232/
ITU V.24/V.28, DTE;
Channels 2 and 3 (to local async
devices): EIA/TIA RS-232/
ITU V.24/V.28 proprietarily
pinned on RJ-45, DCE
ITU V.24/V.28 proprietarily
pinned on RJ-45, DCE
Protocols:
Channel 1: Synchronous 1988
ITU X.25 LAP-B or Frame
Relay; for Frame Relay,
supports CCLM, LMI, and
ANSI PVC management
protocols, as well as ANSI
T1.606, T1.617 Annex D, T1.618,
and ITU Q.922 Annex A;
Relay; for Frame Relay,
supports CCLM, LMI, and
ANSI PVC management
protocols, as well as ANSI
T1.606, T1.617 Annex D, T1.618,
and ITU Q.922 Annex A;
Channels 2 and 3: Asynchronous
SLIP or X.28 (user-selectable)
Clock Source: Channel 1: Internal or
external for receive and transmit
paths, user-selectable
paths, user-selectable
Data Rate:
Channel 1:
MX320A-HS: Up to 2 Mbps,
user-selectable;
MX325A-HS: Up to 128 kbps,
user-selectable;
Channels 2 and 3: 75 bps to
115.2 kbps, user-selectable
Data Format: Channels 2 and 3: 5, 6,
7, or 8 data bits; even, odd, mark,
space, or no parity; 1, 1.5, or
2 stop bits; user-selectable
space, or no parity; 1, 1.5, or
2 stop bits; user-selectable
Flow Control: Channels 2 and 3:
Hardware (DTR/CTS) or software
(X-ON/X-OFF), user-selectable
(X-ON/X-OFF), user-selectable
Other Characteristics for
Channels 2 and 3:
Log-on messages: Herald and
Log-on messages: Herald and
bulletin, user-definable;
Command modes: ITU X.28 (with
proprietary extensions) and
X.29;
X.29;
Terminal handling: Enhanced,
beyond the requirements of
ITU X.3
ITU X.3
Packet Size: Up to 4 KB for X.25 or
8 KB for Frame Relay
Maximum Distance:
Up to 50 ft. (15.2 m) to attached
devices;
MX320A-HS: If unbalanced
control leads aren’t required,
transmission across 500 ft.
(152.4 m) or more might be
possible to/from Channel 1
only
transmission across 500 ft.
(152.4 m) or more might be
possible to/from Channel 1
only
Memory: 512 KB RAM
User Controls:
Top-mounted reset button;
(1) Internal board-mounted
(1) Internal board-mounted
jumper for power-up settings
Indicators: (6) Top-mounted LEDs:
(1) POWER (lights green while
unit is powered);
(1) ERROR (lights red if a
hardware malfunction is
detected);
detected);
(1) SYNC (lights or flashes green
to show status of
synchronization between
linked PAD-2s);
synchronization between
linked PAD-2s);
(3) DATA (one for each
channel—these light or flash
yellow in response to data
activity on the corresponding
port)
yellow in response to data
activity on the corresponding
port)
Connectors:
(1) Left-side-mounted DB25
female for channel 1 (patch
cable provided to M/34 female
on MX320 models);
cable provided to M/34 female
on MX320 models);
(2) Right-side-mounted RJ-45
female for channels 2 and 3;
(1) Front-mounted barrel jack for
power
Temperature Tolerance: 32 to 122˚F
(0 to 50˚C)
Humidity Tolerance: Up to 90%
noncondensing
Power:
Through desktop power supply:
Input: 100 to 250 VAC, 47 to
63 Hz (autosensing), at
approximately 300 mA;
approximately 300 mA;
Output: 5 VDC at up to 1.5 A;
Consumption: 3.5 watts maximum
Size: 0.9"H x 2.1"W x 4.3"D
(2.3 x 5.4 x 11 cm)
Weight: 3.3 oz. (90 g)
Mainframe or
server
X.25
PAD-2
X.25
PAD-2
Frame
Relay
CSU/DSU
CSU/DSU
Back-office
PC
Serial POS
terminal
Specifications
Ordering Information
ITEM
CODE
X.25 PAD-2
V.35 .....................................................................MX320A-HS
RS-232................................................................MX325A-HS
RS-232................................................................MX325A-HS
You might also need:
CSU/DSU MS ........................................................MT132A-R2
V.35 Cable, M/34 M/M (specify length).........EYN450-MM
RS-232 Cable (specify length)
CSU/DSU MS ........................................................MT132A-R2
V.35 Cable, M/34 M/M (specify length).........EYN450-MM
RS-232 Cable (specify length)
DB25 M/F..........................................................ECM25C-MF
DB25 M/M......................................................ECM25C-MM
DB25 M/M......................................................ECM25C-MM
CAT5 unshielded twisted-pair cable, RJ-45 M/M,
specify length...........................................EYN737MS-MM
8-Wire Modular Adapter Kits (unassembled)
RJ-45 F
↔DB9 F...........................................................FA065
RJ-45 F
↔DB25 F.........................................................FA027
RJ-45 F
↔DB25 M.......................................................FA025
Black Box offers the best warranty program in the
industry—Fido Protection
industry—Fido Protection
®
. For more information,
request FaxBack 22512.
Hook all of your
satellite locations—
no matter how small
they are—into your
X.25 or Frame Relay
network.
satellite locations—
no matter how small
they are—into your
X.25 or Frame Relay
network.