Bosch DIE 165 R Manual Do Utilizador

Página de 48
5
Before using for the first time

SAFETY INSTRUCTIONS
Do not flambé food directly under the
extractor hood.
Risk of grease filter catching fire due
to flames.
The hotplates must always be covered with
a utensil.
The extractor hood must not be 
operated above a solid-fuel or gas fire (coal,
wood, etc.) (see installation instructions).
Do not operate all hotplates 
simultaneously over a prolonged period
(max. 15 minutes) at maximum thermal
load, otherwise there is a risk of burns from
touching the housing surfaces or a risk of
damaging the extractor hood. When 
operating the extractor hood above a hob,
operate the hood at maximum setting if
three or more hotplates are on at the same
time.
Do not use the appliance if damaged.
The appliance is not intended for use by
young children or infirmed persons 
without supervision.
Young children should be supervised to
ensure they do not play with the appliance.
When children become old enough to use
the appliance, it is the legal responsibility of
the parents or legal guardian to ensure that
they are instructed in its safe use by quali-
fied persons.
If the connecting cable for this 
appliance is damaged, the cable must be
replaced by the manufacturer or his 
customer service or a similarly qualified 
person in order to prevent serious injury to
the user.
The appliance must be connected to the
mains by a qualified technician only.
Dispose of packaging materials 
properly (see Installation instructions).

Safety instructions
This extractor hood is designed for 
domestic use only.
Light bulbs must always be fitted when the
extractor hood is in use.
Defective bulbs should be replaced imme-
diately to prevent the remaining bulbs from
overloading.
Never operate the extractor hood 
without a grease filter.
Overheated fat or oil can easily catch fire. 
If you are cooking with fat or oil, e.g. chips,
etc., never leave the cooker unattended.
Carefully clean the extractor hood 
before switching on for the first time.
Do not place any objects on the 
extractor hood.